Giant
The KG version is based on a robust steel construction and has a modular design, allowing a customised industrial hoover to be assembled with various frames, dust discharge options, filters and suction units. Thus, an individual KG can be created for every challenge.
The large filter surface and powerful mechanical or compressed-air controlled filter cleaning ensure effective dust separation and long filter service life.
A version with HEPA filter is available for vacuuming health-endangering dust. The specially developed 7-stage high-efficiency turbochargers with capacities up to more than 900 m³/h enable continuous operation. And all with a very low noise level.
Your all-in-one partner for industrial dust extraction
Baseline measurement
Our specialists assess the current situation and identify dust levels, risks and opportunities.
Tailored advice
You'll receive a clear report with recommendations and a custom solution that complies with your industry’s standards.
3D engineering
Our engineers translate the advice into a tailored technical design – fully aligned with your needs, processes and environment. From 3D drawings and capacity calculations to smart, modular solutions that seamlessly integrate into your production process. This ensures a sustainable and future-proof installation.
Installation
We ensure professional on-site installation – including the construction of ductwork and full integration with your production environment. Everything is delivered fully operational and tested, so your workspace is immediately safer and cleaner.
Service & maintenance (SLA)
With a service agreement, you maintain full control over performance, uptime and safety. Our service team is always ready – day in, day out.
Shaped by our
unique approach
The Giant KG series is designed for large quantities of heavy dry dust and bulk material. The series can also be used within central dust extraction systems with multiple extraction points.
During the baseline assessment, Kiekens assesses the dust volume, the ducting network, the number of users, and the required vacuum.
Yes. The Giant can be part of a central dust extraction system as a multi-point suction unit. The combination of high vacuum and a large air volume helps overcome resistance in ducts and hoses. The duct network must be correctly dimensioned for this.
Depending on the version, the specified air displacement ranges between approximately 400 and 980 m³/h. Motor power ranges from 4 to 15 kW.
Kiekens selects the version based on the actual system resistance and required transport speed, not solely on motor power.
Yes. The industrial construction and specially developed high-efficiency turbos make continuous use possible. However, filter cleaning and dust discharge must match the actual dust load. That's why the complete configuration is tailored to the production process.
The Giant can be equipped with a folded PNV cloth filter or with Jet-Pulse cleaned cartridge filters.
The right filter concept depends on the dust properties, the load, and the desired maintenance strategy.
For extracting hazardous substances, a version with a HEPA filter is available.
According to the product specifications, the HEPA filter has an average penetration rate of less than 0.003%. During the baseline assessment, Kiekens determines whether this additional filtration step is necessary.
Yes. The KG series is designed for large quantities of dry dust and chips. Combined with a suitable pre-separator, the main filter can be relieved and the collection of large material volumes made more efficient.
The base consists of a robust steel construction that can be combined with various frames, filters, dust discharges, and suction units. This allows Kiekens to configure the machine around the process and take future changes into account during engineering.
The KG versions have a dust container capacity of 120 liters.
Emptying frequency remains dependent on the material. Especially with heavy substances, Kiekens also looks at ergonomics, handling, and the possibility of applying a pre-separator.
Kiekens starts with a baseline assessment and then designs extraction points, ducting, suction unit, filtration, and dust discharge as one system.
The Giant is a technical component of that solution. This ensures the required suction power is actually available where employees or processes need it.
